The headlight on your Zip provides light and largely defines the front look. At Fresh Parts, you’ll find separate LED bulbs with fittings, complete headlight units, and angel eye lighting, all specially made for the Piaggio Zip.
Replacing the bulb or the complete unit
This is the first choice you make. If your headlight glass is intact and the unit still works well, just replace the bulb. The Piaggio Zip 2000 uses a BA20D fitting, also known as H6. This is a bayonet fitting: press the bulb slightly, turn a quarter turn left, remove. New bulb in, quarter turn right. Done.
If the headlight unit itself is damaged or discolored, you’ll need a complete unit including glass and reflector.
Halogen, LED or angel eye
Halogen is the original choice. Works immediately, no modifications needed. LED offers white light with a xenon look, is brighter than halogen, and lasts longer. An LED bulb with BA20D fitting fits plug-and-play into the original headlight unit of the Zip, no wiring changes needed.
An angel eye is an LED bulb with an illuminated ring around the lamp. This ring lights up as soon as your lights are on and gives the front of the Zip a striking look. Fresh Parts' angel eye is specially prepared for the Zip headlight unit and comes with the necessary mounting materials.
Adjustment after installation
After installing a new bulb, adjust the headlight to avoid blinding oncoming traffic. There’s a small screw under the headlight glass. Use a flathead screwdriver to turn it until the light beam falls correctly on the road.
If you’re unsure which bulb or unit fits your Zip, contact Fresh Parts customer service.
Frequently asked questions
What fitting does the Piaggio Zip headlight use?
The Piaggio Zip 2000 uses a BA20D fitting, also known as H6. This bayonet fitting fits all 2-stroke, 4-stroke, and iGET models of the Zip 2000.
Can I install an LED headlight myself on my Piaggio Zip?
Yes. An LED bulb with BA20D fitting fits plug-and-play into the original headlight unit. You press the old bulb slightly in, turn a quarter turn left, and remove it. The new LED bulb installs the same way. After installation, adjust the light beam with the screw below the headlight glass.
IMPORTANT, WITH LED YOU NEED TO SET THE VOLTAGE TO CONSTANT VOLTAGE!
What is the difference between an LED headlight and an angel eye for the Zip?
An LED headlight only replaces the bulb and gives white light with a xenon look. An angel eye also has an illuminated ring around the bulb that lights whenever your lights are on. Both fit into the original headlight unit of the Zip.
When do I need a complete headlight unit instead of just a bulb?
If the headlight glass is cracked or yellowed, or if the reflector is damaged, replace the complete unit. If the unit is still in good condition, just a bulb or headlight glass will suffice.
Does a BA20D LED bulb fit all Piaggio Zip 2000 models?
Yes. The BA20D fitting is standard on all versions of the Zip 2000, including 2-stroke, 4-stroke 2V, 4-stroke 3V Euro 4, and Euro 5 models.